Every winter season, the pipes in your home are at risk of damage from freezing conditions. Low temperatures can cause your water pipes to freeze, and in some cases burst. The following tips from the Whiteland Water Department can help you safeguard your home before, during and after a pipe freezes.
Prevent Your Pipes from Freezing
Preparation is the best way to prevent frozen pipes. Some of these tips may require some time to complete ahead of cold weather, but they all can help to keep water flowing:
- Disconnect all gardening hoses and install covers on all outside faucets.
- Keep your house temperature at 68 degrees or higher, even if you’re leaving the house for an extended period of time.
- Open cabinet doors below sinks to allow heat from the home to circulate.
- Identify the location of the main water valve and the valve on your water heater. (Learning the location of these valves may come in handy during an emergency.)
- Wrap pipes nearest exterior walls and in crawl spaces with pipe insulation or with heating tape. This can prevent freezing, especially for interior pipes that run along outside walls.
- Close all windows near water pipes; cover or close open-air vents. Freezing temperatures combined with wind drafts can cause pipes to freeze more frequently.
- Heat your basement and consider weather sealing your windows.
- Close garage doors, and consider operating an appropriate space heater in the garage. This is especially important while shoveling/clearing snow.
- Insulate outside walls and unheated areas of your home.
- If you plan to be away from home for an extended period of time, shut off water supply valves to your washing machine.
- Identify the location of your water meter and take the above precautions to keep it from freezing. This is particularly important for meters located in unheated crawlspaces or basements.
Monitor Freezing Pipe Conditions
Once the cold temperatures have come, be sure to monitor your water flow to help to recognize if any pipes are beginning to freeze.
- Allow a faucet to drip slightly (lukewarm water) in order to minimize freezing.
- The first sign of freezing is reduced water flow from a faucet.
- Check your faucets for water flow and pressure before you go to sleep and again when you wake up.
- Check pipes around your water meter, in unheated areas, near exterior walls and in crawl spaces. These tend to be vulnerable to freezing conditions.
- Identify cold air drafts coming in from a flue or chimney chase and caulk gaps that are near pipes.
If A Pipe Freezes
Even the best preparations and attention cannot always prevent freezing. If your water lines do freeze, here are some tips to help thaw them.
- If a faucet or pipe inside your house freezes, you can thaw it using a good hair dryer. (For safety, avoid operating a hair dryer around standing water.)
- To thaw a frozen pipe, heat water on the stove, soak towels in the hot water and wrap them around cold sections of the pipes.
- When thawing a pipe, start thawing it nearest to the faucet. Make sure the faucet is turned on so that melted water can drip out.